Ubiquiti UniFi AC In-Wall Access Point (UAP-AC-IW)

Wall-mounted WiFi 5 AP with 4 spatial streams and a built-in 2-port switch ideal for seamless coverage of smaller rooms.

WiFi 5

4 spatial streams

25 m² (300 ft²) coverage

250+ connected devices

Powered using PoE+

(2) GbE ports with (1) PoE output*

GbE uplink

SKU: UBQ665 Category: UniFi Access Points Brand: Ubiquiti

Description
Reviews (0)

Ubiquiti UniFi AC In-Wall Access Point (UAP-AC-IW) Features

The Ubiquiti UAP-AC-IW is a dual-band 802.11AC WiFi Access Point powered from an Ethernet wall connection. It features two Gigabit Ethernet ports, one of which delivers PoE to power and connect an 802.3af device to the network.

Ubiquiti UniFi UAP-AC-IW Key Features

802.3at PoE+
3x 10/100/1000 Ethernet Ports
2.4GHz radio rate 300 Mbps
5GHz radio rate 867 Mbps
Dual-band 802.11ac

The Ubiquiti UniFi UAP-AC-IW provides simultaneous, dual-band, 2×2 MIMO technology and is available in single and five packs (PoE adapters not included).

Easier Than You Think
Ideal for new and retrofit installations, the UniFi® AC In-Wall is designed to convert an Ethernet wall jack into a dual-band 802.11ac Wi-Fi access point with two Gigabit Ethernet ports.

The Power of PoE
Turn existing wiring into per-room Wi-Fi with the UniFi PoE Switch series. (Requires Cat5e or higher)

Versatile Data and PoE Output
An Ethernet wall jack becomes an access point, a gigabit switch, and a PoE power source.
Wire a workstation and power a VoIP phone. Or power a US-8 for even more Ethernet ports.

Ubiquiti UniFi UAP-AC-IW Technical Specification

General

Dimensions: 139.7 x 86.7 x 25.75 mm (5.5 x 3.41 x 1.01″)
Weight: 200 g (6.43 oz)
Networking Interface: (3) 10/100/1000 Ethernet Ports
Buttons: Reset
Power Supply: UniFi PoE Switch (Not Included)
Power Save: Supported
PoE Out: 48V Pass-Through (Pins 1, 2+; 3, 6-)
Maximum Power Consumption: 7W
Power Method: 802.3at PoE+ Supported
Maximum Power Consumption with PoE Passthrough: 19W*
Maximum TX Power:
– 2.4 GHz: 20 dBm
– 5 GHz: 20 dBm
Antennas:
– (1) Dual-Band Antenna, Single-Polarity
– 2.4 GHz: 1 dBi
– 5 GHz: 2 dBi
WiFi Standards: 802.11 a/b/g/n/r/k/v/ac
Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID: Up to 8 per Radio
Mounting: 1-Gang Electrical Wall Box (Not Included)
Operating Temperature: -10 to 50° C (14 to 122° F)
Operating Humidity: 5 to 95% Noncondensing
Certifications: CE, FCC, IC