Ubiquiti Single-Mode LC FiberCable 300ft (FC-SM-300) Features

Designed for tower deployments of outdoor routing and switching products, the 300′ FC-SM-300 FiberCable Single-Mode LC Fiber Cable from Ubiquiti Networks can withstand the elements. This cable comes equipped with an outdoor-rated jacket and ripcord and features integrated weatherproof tape. For added strength this Fiber cable also features kevlar yarn for added tensile strength.

Ubiquiti FC-SM-300 Key Features

• Length: 300ft (approx 91.44m)
• Resistant to weather conditions
• Uses kevlar for greater flexibility

Specification:

• Steel-Armored for Enhanced Pinch Protection
• Outdoor-Rated Jacket with Ripcord
• Integrated Weatherproof Tape
• Kevlar Yarn for Added Tensile Strength (800 N min.)
• Outer Diameter of Cable: 5.8 ± 0.2 mm
• Six-Strand Single-Mode (G.657.A2)
• Outer Diameter of Fiber Strand: 0.25 mm Nominal
• 6 prefabricated LC connectors on each side
• Insertion Loss
  • 1310 nm: ≤0.5 dB/km
  • 1550 nm: ≤0.5 dB/km

Build your outdoor fiber network using our FiberCable. Lightweight and flexible, FiberCable is ideal for tower deployments of our outdoor routing and switching products, such as EdgePoint. Available in 100, 200, and 300 ft lengths, (30, 60 and 100 meters lengths).

FC-SM-300 is a 100-meter, 300feet, outdoor single mode fiber optic cable 6 prefabricated LC connectors on each side.

Specifications FC-SM-300

Parameters:

• Insertion loss at 1310 nm: 0.40 dB/km and at 1550 nm: 0.30 dB/km
• Steel reinforcement to increase protection against crushing
• Outer sheath with a ripcord
• Integrated weatherproof tape
• Kevlar fibre for increased tensile strength (800 N min.)
• Cable outer diameter: 5.8 ± 0.2 mm – 6 optical fibres, single ohm (G.657.A2)
• Outer diameter of the optical fibre: 0.25 mm nominal
• Cable diameter: 5.1 – 7.0mm