Ubiquiti FiberPoE Gen2 Optical Data Transport for Outdoor PoE Devices (F-POE-G2)
Original price was: KSh 7,500.00.KSh 6,500.00Current price is: KSh 6,500.00. + VAT
About this item
- Optical Data Transport for Outdoor POE Devices
- Ubiquiti Fiber PoE Accessory Gen2 F-POE-G2 for Outdoor PoE Devices
- Fiber-to-Ethernet Conversion: The FiberPoE provides fiber connectivity to any PoE device.
- Designed for Outdoor Durability: The FiberPoE features an outdoor weatherproof form factor with integrated strain relief management.
- Power Versatility: The FiberPoE allows separate power from standard Ethernet cables or standard terminal block / power cable support. There are three ways to configure the input and output power:
Ubiquiti FiberPoE Gen2 Optical Data Transport for Outdoor PoE Devices (F-POE-G2) Features
Overcome PoE limitations with the FiberPoE. The FiberPoE is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE also provide significant EMI and ESD protection over typical PoE installations.
Separate Data and Power Transport
PoE is ideal for indoor or short-run installations. However, for outdoor, long-distance installations, PoE becomes vulnerable to EMI and is limited to 100 meters with correlated power loss. With the FiberPoE, data and power are transported on separate cables to greatly improve data integrity and enable much longer cable runs.
The FiberPoE provides Gigabit bi-directional data transport between twisted-pair Ethernet cable and fiber optic cable, and injects DC power to the Ethernet cable for passive PoE. Use one FiberPoE device as an Fiber‑to‑Ethernet Converter, or a pair of FiberPoE devices to create a Fiber Bridge.
Fiber Optic Data Transport
Using fiber optic cable for data transport significantly reduces electrostatic discharge (ESD) failures and electromagnetic interference (EMI). Data integrity is also sustained in runs beyond 100 meters, the limit of Ethernet over twisted-pair cable. The FiberPoE supports a 1G SFP module and 24V or 50V power from a DC power cable or PoE cable.
Integrated Fiber Cable Strain Relief
An integrated strain relief system was thoughtfully designed to fit inside the FiberPoE cover for added protection and a cleaner installation.
FiberPoE Specification | |
|---|---|
| Dimensions | 196.4 x 93.5 x 32.4 mm ( 7.73 x 3.68 x 1.28″) |
| Weight | 288 g (10.2 oz) |
| Enclosure | White Polycarbonate |
| Interface Connections |
|
| Typical Power Consumption | 1.5W |
| Power Method |
|
| PoE Output | PoE RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC), or 4-Pair (24VDC or 50VDC) PoE |
| DC Output | Terminal Block, 2-Wire (24VDC or 50VDC) |
| Input DC Voltage | 16 to 57V |
| LED | White: Power On Blue: Connected Blue (Flashing): Activity |
| Operating Temperature | -30 to 60° C (-22 to 140° F) |
| Operating Humidity | 10 to 95% Noncondensing |
| ESD/EMP Protection | ± 24KV Contact / Air for Ethernet |
| Certifications | CE, FCC, IC |
Reviews
There are no reviews yet.