Ubiquiti airFiber 24 GHz Point-to-Point radio Technical Specification

General

• Operating Frequency: 24.05 – 24.25 GHz
• Dimensions:
  – Radio: 649 x 426 x 303 mm (25.55 x 16.77 x 11.93″)
  – Box: 725 x 520 x 410 mm (28.54 x 20.47 x 16.14″)
• Weight:
  – Radio (Mount Included): 10.5 kg (23.15 lb)
  – Box: 17 kg (37.48 lb)
• Max. Power Consumption: 50W
• Certifications: CE, FCC, IC
• Power Supply: 50V, 1.2A PoE GigE Adapter (Included)
• Power Method: Passive Power over Ethernet
• Supported Voltage Range: +42 to +58VDC, -48VDC
• Wind Loading: 480 N @ 200 km/hr (108 lbf @ 125 mph)
• Wind Survivability: 200 km/hr (125 mph)
• Mounting: Pole Mount Kit (Included)
• Operating Temperature: -40 to 55° C (-40 to 131° F)
• LEDs (8) Status LEDs:
  – Data Port Speed
  – Data Port Link/Activity
  – Configuration Port Speed
  – Configuration Port Link/Activity
  – GPS Synchronisation
  – Modulation Mode
  – Master/Slave
  – RF Status
  – (1) Two-Digit LED Display Calibrated in dBm

Interface

• Data Port: (1) 10/100/1000 Ethernet Port
• Configuration Port: (1) 10/100 Ethernet Port
• Auxiliary Port: (1) RJ-12, Alignment Tone Port

System

• Maximum Throughput: 1.5+ Gbps
• Maximum Range: 13+ km
• Packets per Second: > 1 Million
• Encryption: 128-Bit AES
• Uplink/Downlink Ratio: 50% Fixed
• Latency:
  – Full Duplex Mode: < 200 µs at Full Throughput
  – Half Duplex Mode: < 2 ms at Full Throughput
• MTU (Maximum Transmission Unit): Up to 9600

Radio Frequency

• GPS: GPS Clock Synchronisation

Transceiver

• EIRP: ~33 dBm (FCC/IC), ~20 dBm (CE), ~40 dBm (Other Regions)
• Frequency Accuracy:
  – ±2.5 ppm without GPS Synchronisation
  – ±0.2 ppm with GPS Synchronisation
• Channel Bandwidth: 100 MHz
• Operating Channels: 24.1 GHz, 24.2 GHz
• Modulation:
  – 64QAM MIMO
  – 16QAM MIMO
  – QPSK MIMO
  – QPSK SISO
  – ¼x QPSK SISO

Integrated Split Antenna

• TX Gain: 33 dBi
• RX Gain: 38 dBi
• Beamwidth: < 3.5°
• Front-to-Back Ratio: 70 dB
• Polarity: Dual-Slant Polarisation
• Cross-Polarity Isolation: > 28 dB